QCE Chemistry
Mass Spectrometry and Isotopic Abundance: A QCE Chemistry Guide
Many Queensland Chemistry students lose marks on mass spectrometry questions not because the maths is hard, but because they misread the spectrum. They confuse the tallest peak with the heaviest isotope, or they forget to convert percentage abundances to fractions before multiplying. QCAA assessors see these slips constantly in the external assessment, and a clear understanding of what each axis actually means is the fastest way to stop dropping points.
What the syllabus asks
For Unit 1: Chemical Fundamentals, you need to understand how mass spectrometry reveals the isotopic composition of an element, including which isotopes are present and their relative abundances. You also need to use that data to calculate relative atomic mass.
The idea, explained
How a mass spectrometer works (the essentials)
You do not need to know the detailed operation of the instrument, but you do need to know the three key steps:
- Ionisation. Atoms or molecules in the sample are converted to positive ions, most commonly by knocking off one electron.
- Separation. The resulting ions are separated according to their mass-to-charge ratio, written as m/z.
- Detection. The instrument records the relative number of ions arriving at each m/z value.
Reading the mass spectrum
The output is a plot with m/z on the x-axis and relative abundance (or percentage abundance) on the y-axis. For elements, singly-charged ions dominate, so m/z effectively equals the mass of that isotope. Each peak on the spectrum therefore corresponds to one isotope of the element. The height of a peak tells you how abundant that isotope is, with all peaks normalised so their abundances sum to 100%.
Calculating relative atomic mass (Ar)
Because a naturally occurring element is a mixture of isotopes in a fixed ratio, its relative atomic mass is a weighted average of the isotopic masses:
Ar = (isotope mass 1 × fractional abundance 1) + (isotope mass 2 × fractional abundance 2) + ...
Or, if you are working with percentage abundances:
Ar = [(isotope mass 1 × % abundance 1) + (isotope mass 2 × % abundance 2) + ...] / 100
Worked example: chlorine (two isotopes)
A mass spectrum of chlorine shows two peaks: m/z 35 at 75.77% and m/z 37 at 24.23%.
Ar = (35 × 0.7577) + (37 × 0.2423) Ar = 26.520 + 8.965 Ar = 35.49
This is close to the periodic table value of approximately 35.45, and it explains why the relative atomic mass of chlorine is a decimal rather than a whole number. Chlorine is a mixture of two isotopes in a fixed natural ratio.
Worked example: magnesium (three isotopes)
Magnesium has three isotopes: m/z 24 at 78.99%, m/z 25 at 10.00%, and m/z 26 at 11.01%.
Ar = (24 × 0.7899) + (25 × 0.1000) + (26 × 0.1101) Ar = 18.958 + 2.500 + 2.863 Ar = 24.32
Working backwards: finding abundances from Ar
If you know the relative atomic mass and an element has exactly two isotopes, you can find the abundances algebraically. Let x be the fractional abundance of isotope A; then (1 - x) is the fractional abundance of isotope B.
Ar = (mass_A × x) + (mass_B × (1 - x))
Example: boron has isotopes 10B (mass 10.01) and 11B (mass 11.01), and Ar = 10.81.
10.81 = 10.01x + 11.01(1 - x) 10.81 = 10.01x + 11.01 - 11.01x -0.20 = -1.00x x = 0.20
So 10B is 20% abundant and 11B is 80% abundant.
What the exam asks
In the external assessment, QCAA assessors typically ask you to:
- Read m/z values and percentage abundances from a given spectrum and identify which isotopes are present.
- Calculate the relative atomic mass from those values using the weighted average formula.
- Explain why the relative atomic mass of an element is a decimal number (because it is a weighted average of isotope masses).
- Determine the percentage abundances of two isotopes when given the relative atomic mass and the two isotopic masses.
Show every step of your working. QCAA assessors award marks for method, so a small arithmetic slip will cost you far less than a missing formula or a skipped step.
Common mistakes
- Confusing the tallest peak with the heaviest isotope. The tallest peak is the most abundant isotope. The peak at the highest m/z value is the heaviest isotope. These are often different peaks.
- Forgetting to convert percentages to fractions. If you use 75.77 instead of 0.7577 in the formula without dividing by 100 at the end, your answer will be 100 times too large.
- Assuming Ar equals the m/z of the tallest peak. The relative atomic mass is pulled towards the other isotopes by their fractional contributions, so it is almost never a whole number and rarely equals any single peak exactly.
- Setting up the algebra incorrectly for the reverse calculation. When finding abundances from Ar, make sure the two fractional abundances add to 1. Write (1 - x) for the second isotope, not a separate variable, or you will have two unknowns and one equation.
- Rounding too early. Carry at least four significant figures through each multiplication before summing, then round the final answer. Early rounding compounds errors and can shift your answer outside the acceptable range for QCAA assessors.
Mass spectrometry is one of those topics where a solid grasp of the underlying logic, combined with careful, step-by-step arithmetic, is all you need to score full marks. If you want guided practice with instant feedback tailored to the QCAA syllabus, Avocado's AI-native tutoring service has you covered. Work through the Mass Spectrometry lessons at your own pace and see exactly where your working goes right, and where it needs a little adjustment.
